宏泰卫浴三管优质定制过滤器外壳尺寸 25.4-152.4 HTV-FH001

$0.00

型号 HT-FLT006
最大工作压力 1.0mpa/10 巴 连接端 夹钳螺钉固定
最高工作温度 150°C 运行 通过手册、
机身材料 SS316L、SS304、 密封材料 硅树脂、三元乙丙橡胶、氟橡胶、聚四氟乙烯或丁腈橡胶
内表面处理 Ra 0.5μm 外部表面处理: Ra 0.8μm
规格 1/2″-6″ 认证 原材料报告/成品质量报告
统一编码 7307290000 完成 镜面抛光或亚光抛光
原材料技术 锻造或铸造 加工机械 LG 马扎克数控机床
设计标准 3A 或 DIN、SMS、ISO/IDF 应用 食品或饮料工业用途
运输包 发泡塑料+木箱 起源 中国温州

SHARE:

category:

说明

卫生级管道过滤器可去除液体中大于 0.45um 的颗粒和细菌,具有过滤精度高、转换速度快、吸附性低、无介质脱落、耐酸碱腐蚀、耐高温、操作方便等优点。目前,它们已作为必备设备广泛应用于制药、化工、电子、饮料、果酒、生物水处理和环保等各行各业。

材料 304、316L

过滤精度(微米) 0.45-100

过滤能力(吨/小时) 0.2-50

技术规格

材料: 304、316L304、316L 进出口连接方式:快速接头连接、法兰连接、螺纹连接 过滤精度(um): 0.45-1000.45-100 过滤能力(吨/小时):0.2-50 工作压力(兆帕):0.1-1.0 温度范围 (℃):1-100 滤芯材料:不锈钢不锈钢滤篮 + 滤网

主要分为直管过滤器、Y 型过滤器、带直角管过滤器 卫生级管道过滤器可用于医药、化工、电子、饮料、酒类、生化水处理、环保等工业设备 卫生级管道过滤器可滤除 0.45um 以上的液体颗粒和细菌,具有过滤精度高、转换速度快、吸附少、无介质脱落、耐酸碱腐蚀、阻力大、操作简便等优点。已广泛应用于医药、化工、电子、饮料、酒类、生化水处理、环保等必备设备。

卫生过滤器用于过滤流体过程中的固体物质。网孔设计得足够多孔,不容易堵塞,但仍能阻止大颗粒固体通过,网孔的大小取决于介质材料,通常我们可以生产的网孔规格从 1000 目到 10 目不等。我们有两种不同样式的过滤器(内嵌式过滤器和侧进式过滤器),每种过滤器都有独特的功能,适用于各种压力情况。建议将过滤器放在泵之后,因为吸入可能会损坏过滤器芯。此外,防止过滤器在焊接处泄漏也非常重要,有时会在拧紧螺母的地方发生泄漏,因此我们的产品会经过严格的泄漏测试,测试压力约为 10 巴。

Sanitary stainless steel pipe filter is mainly composed of nozzle, cylinder, filter basket, flange, flange cover and fasteners. Installed on the pipeline can remove large solid impurities in the fluid, so that the machine equipment (including compressors, pumps, etc.), instruments can work and operate normally, to stabilize the process and ensure the role of safe production.
Stainless steel filter adopts 304, 316L stainless steel wedge filter screen, high strength, high precision, corrosion resistance, X high filtration accuracy up to 25 microns.

 

1, import and export diameter:
In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, generally consistent with the inlet pipe caliber.
2, nominal pressure:
The pressure of the filter is determined according to the possible X high pressure of the filter line.
3, the selection of the number of holes:
The main consideration is the particle size of the impurities to be intercepted, according to the process requirements of the medium process. The particle size of various specifications can be intercepted by the screen check the table “filter specifications”.
4, filter material:
The material of the filter is generally the same as the material of the connected process pipe, and the filter of cast iron, carbon steel, low alloy steel or stainless steel can be considered for different service conditions.
5, filter resistance loss calculation
Water filter, in the general calculation of rated flow rate, the pressure loss is 0.52 ~ 1.2kpa
【 Sanitary stainless steel pipe filter 】 Scope of application
Sanitary stainless steel pipe filter has the advantages of compact structure, large filtration capacity, small pressure loss, wide application range, easy maintenance, etc. The main applicable materials are:
1, chemical, petrochemical production of weakly corrosive materials, such as: water, oil, ammonia, hydrocarbons, etc.
2. Corrosive materials in chemical production, such as caustic soda, soda ash, concentrated sulfuric acid, carbonic acid, aldehyde acid, etc.
3, low temperature materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various coolants.
4, food, pharmaceutical production has health requirements of the material, such as: beer, beverages, dairy products, syrup, etc.
[Sanitary stainless steel pipe filter] Working principle
When the liquid enters the filter basket through the cylinder, the solid impurity particles are blocked in the filter basket, and the clean fluid passes through the filter basket and is discharged by the filter outlet. When it is necessary to clean, unscrew the bottom plug of the main pipe, drain the fluid, remove the flange cover, and reinstall it after cleaning. Therefore, it is very convenient to use and maintain

 

产品包装说明

每件产品首先用泡沫袋单独包装,然后小心翼翼地放入指定的纸箱。最后,装入托盘或出口木箱。整个包装过程都是严格执行的,以防止在运输过程中出现任何损坏。

关于我们

宏泰专业生产高品质的卫生级阀门和不锈钢管件,主要服务于制药、食品加工和化工等行业。我们的产品采用优质 304、316 和 316L 不锈钢制成,具有出色的耐腐蚀性,并采用激光切割和精密焊接等先进制造技术精心制作而成。HongTai 的阀门专为卫生和流体完整性而设计,是要求最佳清洁度和持久性能的行业的理想选择。

为什么选择我们

质量保证: 我们严格控制从原材料到成品的每个生产阶段,确保符合 ISO9001 和国际认证,包括 3A、DIN 和 ISO 标准。

行业专长: 数十年为食品、饮料和制药等关键行业提供解决方案的经验。

先进技术: 我们拥有最先进的设备,包括定期更新的数控车床和精密工具,确保每件产品都具有较高的表面精度和较小的公差。

100% 检验: 每件产品在出厂前都要经过严格的测试,包括尺寸和阀门泄漏检测,以确保质量完美无瑕。

覆盖全球: 我们以始终如一的质量和准时交货赢得了全球企业的信赖。

选择 HongTai,您将在阀门和管件解决方案方面获得无与伦比的可靠性、性能和创新性。

 

联系我们
如需了解更多信息或讨论您的要求,请通过以下方式联系我们:
电子邮件:ht@htcdf.com
whatsapp:(86)18875809195
您还可以访问我们的 联系我们 页面获取更多联系方式。

评论

目前尚无评论。

成为第一个评论 "HongTai Sanitary triclamp high quality customized filter housing size 25.4-152.4 HTV-FH001 "的用户

您的邮箱地址不会被公开。 必填项已用 * 标注

返回
whatsapp
电子邮件
微信
Email:ht@htcdf.com
微信:18875809195
x